EasyManua.ls Logo

Briggs & Stratton 7000 User Manual

Briggs & Stratton 7000
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Questions? Help is just a moment away!
Preguntas? La ayuda es justa un momento
lejos!
Vous avez des questions? Vous n'avez pas
besoin d'aller loin pour trouver de l'aide!
Call: Home Generator Helpline
Llamada: Línea Directa de Generador de Hogar
Appelez: Ligne Directe de Génératrice la Maison
(800) 743-4115 M-F 8-5 CT
BRIGGSandSTRATTON.COM
Installation,
Start-Up and
Operator’s Manual
Manual de Instalación,
Arranque y Operario
Manuel d'Installation,
Démarrage et Utilisation
7000 Rated Watts
Home Generator System
Model 040220A Part No. 207359GS Rev. - (05/06/08)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Briggs & Stratton 7000 and is the answer not in the manual?

Briggs & Stratton 7000 Specifications

General IconGeneral
AC Voltage120/240 V
Engine Type4-Stroke OHV
Fuel TypeGasoline
Outlet Types4x 120V 20A, 1x 120/240V 30A
Warranty3 years

Summary

Safety Rules

Important Safety Instructions

General guidelines and warnings to prevent injury or death.

Engine Exhaust Hazards

Hazards associated with engine exhaust gases like carbon monoxide.

Safety Rules (Continued)

Electrical Hazards

Risks of electrocution from generator voltage and improper grounding.

Rotating Parts Hazards

Dangers from moving parts like starter and rotating components.

Fuel and Fire Hazards

Hazards related to flammable fuels and risks of burns/fires from hot components.

Know Your Home Standby Generator

Know Your Control Panel

Installation Procedures (Continued)

Generator Location Guidelines

Criteria for selecting a safe and compliant location for the generator.

Essential Circuits

Essential Circuit Selection Process

Guidance on adding up wattage and considering starting surge for circuit selection.

The Gaseous Fuel System

Fuel Supply System Considerations

Factors for planning the fuel supply system, including pressure and valve requirements.

Wire Connections and Grounding

Before Initial Start-Up

Engine Oil Requirements

Checking engine oil level and understanding oil type for operation.

Battery Connection and Service

Battery Connection Procedure

Steps for correctly connecting the 12 Volt DC battery terminals.

Fuel System and Initial Start-Up

Fuel System Selection (LP Conversion)

Procedure for reconfiguring the generator to run on LP gas.

Initial Start-Up (No Load)

Steps for testing the generator without electrical loads connected.

Automatic Operation Sequence

How the generator automatically starts and stops based on utility power.

Operation Setup and Inspection

Specifications and Automatic Operation

Generator Specifications

Key performance ratings and operating parameters for the generator.

Automatic Operation Setup and Checks

Steps to enable, verify, and test the generator's automatic operation mode.

Fault Detection System Overview

Fault Detection System Function

How sensors automatically shut down the generator to prevent damage.

Fault Detection System Details

Fault Reset and Battery Issues

Procedure to reset faults and diagnose/remedy a discharged battery.

Engine and Frequency Faults

Troubleshooting engine start failures, low frequency, and engine overspeed conditions.

Generator Maintenance

Troubleshooting Common Issues

No AC Output or Load Bogging

Diagnosing and resolving problems with no output or performance degradation under load.

Starting and Shutdown Issues

Troubleshooting engine starting failures, rough running, and unexpected shutdowns.

Schematic Diagram

Wiring Diagram

Limited Warranty Policy

Related product manuals