Need help?Do you have a question about the Briggs & Stratton Vanguard 10V000 and is the answer not in the manual?
General| Engine Type | Single-cylinder, OHV |
|---|---|
| Bore x Stroke | 68.3 mm x 54.0 mm |
| Compression Ratio | 8.5:1 |
| Fuel Type | Unleaded gasoline |
| Cooling System | Air-cooled |
| Governor Type | Mechanical |
| Engine Oil Type | SAE 10W-30 |
| Spark Plug Gap | 0.76 mm |
| Valve Clearance (Intake) | 0.10-0.15 mm |
| Valve Clearance (Exhaust) | 0.15-0.20 mm |
| Displacement | 305 cc |
| Ignition System | Electronic |
| Starter Type | Recoil |
Defines signal words DANGER, WARNING, CAUTION, and NOTICE for safety alerts.
Identifies the location of various engine features and controls for familiarization.
Instructions for converting manual throttle to remote or fixed speed operations.
Steps for draining old oil and adding new oil to the engine.
To Next Page
