快速安装手册
http://www.whkj.com.cn010‐51655555
●安装 Installation
安装方法：
打印机挂在设备上。按照打印机底部两个挂孔的相对位置在设备上安装两个螺丝。打印机
挂上即可。
WH-T1 两挂孔间距(单位毫米):93.5mm
Installation Method
As the picture show, fix two screws on the equipment according to the relative
position of the two mounting holes in the back of printer, and then hang the printer
on the equipment.
The Space between the two mounting holes : 93.5mm
To Next Page
Loading...