10
7. (Optional) Under Rate Limit Network Download Traffic, set parameters for download traffic.
8. Click Create Setup Files.
9. Select an SD card or USB flash drive (HD810, HD1010, HD1010w, and HD1020 only) to store the setup files. Click
OK.
Note: Your SD, SDHC, or SDXC card must be formatted using FAT32 for it to work with a BrightSign player.
10. Turn off your BrightSign player by unplugging the power adapter. Insert the SD card or Flash drive into the unit.
11. Turn on the BrightSign player by reconnecting the power adapter.
Note: The SD card or Flash drive must remain connected to the BrightSign player or it will not receive scheduled
presentations from the network. The BrightSign player has no internal storage and therefore cannot receive content
without a storage device connected. For a detailed description of all items in the BrightSign Unit Setup window,
including optional settings, see the BrightAuthor user guide at: www.brightsign.biz/support/userguide.php.
To Next Page
Loading...
Need help?
General