Need help?Do you have a question about the Brillion SS-10 and is the answer not in the manual?
Explains front, rear, left, and right designations relative to operator position.
Details necessary information (model/serial number) when ordering parts.
Lists 16 essential safety rules for operating and maintaining the seeder.
Defines DANGER, WARNING, CAUTION levels and instructions for decal care.
Illustrates the placement of various safety decals on the seeder machine and lists part numbers.
Instructions for using the transport lock and parking pin for safe operation.
Details how to adjust the micro-meter for setting the seed rate on the front meter box.
Covers setting agitator box seed rate and the importance of seed rate calibration.
Explains the transmission drive bolt's role in calibration and operational speed.
Details procedures for optional track removers and the transmission drive bolt.
Provides a chart of planting rates for various seeds in the front meter box.
Lists planting rates for the agitator (rear) box for different seeds and settings.
Covers maintenance tasks including protecting the acre meter, checking fasteners, tire pressure, and lubrication.
Details how to adjust the tension of the chain between the front roller and transmission.
Instructions for adjusting roller wheels and feed cups for uniform seeding.
Step-by-step guide to adjusting the agitator box slide for proper seed coverage.
Instructions for assembling pull type and pick-up seeder configurations.
Steps for installing the optional agitator box, including panel reversal.
Guide for installing the optional S-Tine tire track remover kit.
Instructions for mounting and securing the optional acre meter.
Steps for installing optional dividers within the meter box.
Instructions for installing the optional speed-up and brush agitator kits.
Details on assembling and installing the optional coil tine tire track remover.
Instructions for assembling and mounting the optional scraper kit.
Guidance on installing the optional safety chain for towing.
Lists the different models available for the SS10 series grass seeders.
Provides approximate weights and key dimensions for the seeder models.
Details various optional accessories available for the seeder, including part numbers and weights.
To Next Page
General
