Need help?Do you have a question about the Brillion TURFMAKER Junior SLP2041 and is the answer not in the manual?
Defines directional terms relative to the operator's position.
Instructions for ordering replacement parts, requiring model and serial numbers.
General safety guidelines and precautions for operating the machine to prevent accidents.
Explains DANGER, WARNING, and CAUTION levels and the importance of decal maintenance.
Illustrates safety decal placement on the machine for user awareness and safety.
Step-by-step guide for connecting the seeder to the tractor via the 3-point hitch.
Instructions for installing the optional lift sling kit for safe lifting and moving of the seeder.
Procedures for installing the optional acre meter kit for tracking acreage covered.
Details on using the electronic acre meter, including quick-start settings and programming.
Guide to adjusting the seeding rate using the micro-meter and seed cups for uniform seeding.
Process for calibrating seed rates for different seeds using provided charts and machine settings.
Instructions for adjusting the depth of wheel track removers using capscrews and nuts.
Guidelines for greasing fittings, oiling chains, and adjusting roller wheels for optimal performance.
Steps to adjust the drive chain tension between the front roller and transmission for proper operation.
Instructions on how to replace the batteries in the electronic acre meter when indicated.
Procedures for setting seed cups uniformly and adjusting the pointer for accurate seeding.
Guidance on where to store the specific wrenches used for seed rate adjustments.
Safety precautions to follow before and during the addition of the rear seedbox to the machine.
Shows the placement of safety decals specific to the rear seedbox installation.
Instructions for attaching the left and right end plates to the front seedbox for the rear unit.
Steps to remove the old deflector and attach the new one provided with the rear seedbox kit.
Procedure for connecting the rear seedbox and shaft unit to the main seeder frame.
Guide for fitting the right end of the seed shaft with the bearing plate assembly.
Instructions for attaching the rear transmission guard assembly to the seeder frame.
How to set seed cups uniformly for the rear seedbox to ensure even seeding.
Adjusting the pointer on the rear seedbox seed shaft extension to the correct groove.
Guide for adjusting the seeding rate for the rear seedbox using the micro-meter on the right side.
Lists the different models of the SL2 Turfmaker Junior series and their descriptions.
Provides key physical dimensions for the different seeder models.
Lists available optional equipment for the Turfmaker Junior series, including part numbers and weights.
To Next Page
General
