Need help?Do you have a question about the Brink Flair 400 and is the answer not in the manual?
Presents detailed technical specifications for the Flair 400, including voltage, dimensions, weight, filter class, and performance data.
Outlines the general steps and requirements for installing the Flair 400 appliance, including duct and electrical connections.
Details the specific requirements and considerations for mounting the Flair 400 appliance, including wall mounting and environmental conditions.
Explains how to correctly connect the condensate discharge line and siphon for the Flair 400 appliance.
Provides guidelines for airtight installation of air ducts, including speed limits, insulation, and noise reduction measures.
Details the electrical connection procedures for the Flair 400 appliance, including power and accessory connections.
Instructs on connecting the Flair 400 appliance to a standard 230V earthed wall socket.
Provides instructions for connecting the Flair 400 to a Modbus system or building management system.
Details how to connect multiple Flair 400 appliances together using the internal bus for networked operation.
Provides step-by-step instructions for safely switching the Flair 400 appliance on and off.
Explains how the appliance's control system indicates faults, distinguishing between limited and locking faults.
Lists and explains various fault codes displayed by the appliance, categorizing them as non-locking or locking faults.
Details the procedure for cleaning or replacing the filters, including using the filter wizard and resetting the timer.
Lists the default and configurable settings for the standard Flair 400 appliance, covering flow rate, bypass, and frost protection.
Details the configurable settings specific to the Flair 400 appliance when equipped with the optional Plus PCB.
To Next Page
General
