To Next PageTo Next PageWhat to do if Brink Temperature Controller shows Fault E999?
If the Brink Temperature Controller displays fault code E999, first verify that the dip switches on the control board match the settings shown in the provided drawing. If the dip switches are correctly set and the error persists, the control board should be replaced with a new one of the correct type.
What to do if fault E999 appears on Brink Air Conditioner?
If fault code E999 appears on the display of your Brink Air Conditioner when you power it on, it indicates that the mounted control board isn't right for your appliance or the dip switches are not correctly set. First, check the dip switch settings on the control board against the provided diagram. If the settings match the diagram and the error persists, you will need to replace the control board with the correct type.
General| Airflow rate | 400 m³/h |
|---|---|
| Heat recovery efficiency | 95% |
| Fan type | Centrifugal |
| Filter class | G4/F7 |
| Mounting | Wall or floor |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Control | Electronic |
Details components included in the heat recovery unit package.
Provides detailed technical specifications for Renovent Excellent 300 models.
Presents dimensional drawings and connection layouts for right-handed versions.
Lists general requirements and steps for appliance installation.
Details how to connect the power plug, multiple switch, and communication protocols.
Introduces the LCD display, control keys, and basic interface functions.
Guides users on how to modify appliance settings like air flow rates.
Details methods for powering the appliance on and off via plug or software.
Explains how to adjust air flow rates for different operating modes and unit types.
Covers general troubleshooting, fault detection, display codes, and detailed fault causes/actions.
Details the meaning of non-locking and locking fault indications on the display.
Provides instructions for cleaning or replacing the unit's air filters.
