Brink WTW User Manual

5
Table of Contents
User’s manual 5
Introduction
I Description WTW control 5
II Symbols used 6
1 Technical specications 6
1.1 General product specications 6
1.2 Environmental inuences 6
1.3 Overview operational controls 6
1.4 Overview display version main screen 6
1.5 Ventilation positions 6
2 Precautionary measures and safety instructions 6
2.1 General 6
2.2 During placement 6
2.3 During use 7
2.4 During maintenance 7
2.5 For the environment 7
3 Assembly and installation (to be performed by the
installer) 7
3.1 Assembly 7
3.1.1 Disconnecting the operational module from the
wall bracket 7
3.1.2 Electrical connection 7
3.1.3 Mounting the wall bracket 7
3.1.4 Replacing the operational module in the wall
bracket 7
3.2 Installation 7
3.2.1 Setting language 7
3.2.2 Setting time 7
3.2.3 Setting date 8
3.2.4 Selecting a device connected to the WTW
control 8
3.2.5 Factory settings WTW control 8
4 Description of operation; manner of use 8
4.1 Navigation: general description 8
4.2. Selecting a device connected to the WTW control 8
4.3 Weekly programmes: P1, P2 and P3 8
4.3.1 Standard settings P1, P2 and P3 8
4.3.2 Creating a P1 programme 8
4.3.3 Creating a P2 programme 8
4.3.4 Creating a P3 programme 9
4.4 Activating programme type (P1, P2 or P3) 9
4.5 Temporarily overriding programme 9
4.6 Overriding programme for a longer period of time 10
4.7 Setting ventilation mode values 10
4.8 Retrieving settings 10
4.9 Factory settings connected device 10
5 Maintenance 10
5.1 General maintenance 10
5.2 Cleaning or replacing lter 10
5.2.1 Filter notication 10
5.2.2 Removing, cleaning or replacing lters 10
5.2.3 Re-setting lter notication 10
6 Dismantling 10
7 Repair 10
8 Environment 10
9 Troubleshooting and guarantee 11
9.1 Troubleshooting 11
9.2 Guarantee 11
Appendix 1 11
Appendix 2 Standard settings weekly programmes 11
User’s manual
Dear client,
Thank you for buying the WTW control. This user’s manual
contains all required information to quickly become familiar
with the product. We kindly request you to carefully go
through this information before using the product.
This user’s manual is intended for the WTW control’s installer
and end user. You can retrieve the required information from
the user’s manual via the table of contents.
This is an extended user’s manual. A Quick Start Guide is
available, in addition to this user’s manual.
Take good care of this user’s manual!
For more information or ordering manuals, please contact:
Brink Climate Systems B.V.
R.D. Bugelstraat 3
7954 DA Staphorst
Nederland
Tel: +31 522 46 99 44
Fax: +31 522 46 94 00
E-mail: info@brinkclimatesystems.com
www: www.brinkclimatesystems.com
Introduction
I Description WTW control
Intended and unintended use
The WTW control should be used in combination with
products that have been approved by Brink Climate Systems.
Brink Climate Systems cannot be held responsible for
possible damage
caused by improper, incorrect or unwise use. It is important
that one understands this user’s manual completely.
Working with other devices
The WTW control is connected to other devices. The WTW
is co-dependent on these devices’ operation for its proper
GB

Brink WTW Specifications

General

Brand	Brink
Model	WTW
Category	Control Unit
Language	English