Brinno TLC 200 - Install SD Card; Turning the Camera On

5
www.brinno.com
Rotate the Power switch to ON position.
Process screen
It may display other information on screen, please refer to page 3.
Set Up screen
Now, you can set Date and Time and Time Interval before you use your
TimeLapse Camera!
1
2
3
1
2
3
Open SD card cover.
Insert SD card until it clicks into place.
Close SD card cover.
Initial Step-2
Initial Step-3
Install SD Card
Turning the Camera on
1 2 3
1 2 3
READING..
SD
Normal
ASAP
2011/08/31
22:58:32
OK
on