10
Connecting and Charging
• The SmartClean 201 has a water-resistant handle. It is
designed to be rinsed lightly but not meant to be used
under water or in very wet situations.
• Charge the brush before rst use. The brush will come
from the factory with a partial charge but should be fully
charged prior to use.
• To charge the brush, plug in the charging base to a suitable
outlet as described in the “Safety Information” section. Place
the brush handle in the cradle. When the unit is charging, the
blue “charging” indicator light on the handle will illuminate.
• A full charge takes approximately 24 hours and will sustain
the brush for about six weeks of regular brushing before
requiring a charge.
Getting Started
To Next Page
Loading...
Need help?
General