Why is the LED blinking red on my Brita Water Filtration System?
The red blinking LED on your Brita Water Filtration System usually indicates that it's time to replace the filter cartridge. You should change the filter cartridge and then reset the battery.
How to fix no water flow in Brita Water Filtration Systems?
If your Brita Water Filtration System isn't dispensing water, first ensure that the water intake is open. You can do this by opening the upstream shut-off valve or closing the locking handle on the filter head. Also, check the hoses for any kinks that might be blocking the water flow.
What to do if Brita On Line Active Plus have low water flow?
If you're experiencing low water flow from your Brita Water Filtration System even with the water intake open, the mains pressure might be too low. Check the mains pressure. If the problem persists, inspect the filter system and cartridge, replacing them if necessary. Also, check the hoses for kinks. If the filter head isn't mounted in the direction of water flow or the hoses are wrongly connected, dismantle and reinstall the filter head and hoses in the correct direction of water flow.
Why is the LED not blinking on my Brita Water Filtration System?
If the LED on your Brita Water Filtration System isn't blinking, there are a few potential causes. The battery might be empty and needs replacing (usually after 3 years). Alternatively, the battery might be installed incorrectly, try turning it around. Also, ensure that the Brita electronic cartridge exchange indicator is correctly installed, with the battery side facing the Brita logo on the lever.
General| Certification | TÜV, ACS |
|---|---|
| Product color | Metallic |
Weight and Dimensions| Height (max) | 290 mm |
|---|
To Next Page
