Brita Redi-Twist USS-334

To Next Page

USS-334

Installation

Instructions

CONNECT TO

AUXILIARY FAUCET

Step 1

Step 2

Step 3

As Easy As...

LOCK

1/4 turn

Step 4

System Tested and Certiﬁed by NSF International against

NSF/ANSI Standard 42 for the reduction of Aesthetic Chlorine

Taste & Odor and Particulate Class I and Standard 53 for the

reduction of Atrazine, Cysts, Lead and Lindane. System Tested

and Certiﬁed by NSF International to NSF Standard P231 for

Microbiological Water Puriﬁers and US EPA Guide Standard

and Protocol for Testing Microbiological Water Puriﬁers

for the reduction of Bacteria, Viruses and Cysts. System

Tested and Certiﬁed by NSF International against NSF/ANSI

Standard 372 for low lead content and compliance.

*Please refer to Performance Data Sheet for complete reduction data.

Redi-Twist™ 3 Stage Filtration System Model USS-334

Need help?

Do you have a question about the Brita Redi-Twist USS-334 and is the answer not in the manual?

Summary

BRITA Redi-Twist Filtration System Installation Instructions

Installation Overview

Conceptual overview of the four-step installation process for the Brita filtration system.

Tools and Materials Required

Package Contents and Tools Needed

Lists components, required tools, fittings, and optional items for installation.

Helpful Hints and Warnings

Before You Start: Preparation Steps

Guidance on locating space, mounting position, access, turning off water, and releasing pressure.

Important Precautions and Information

Safety, Filtration Facts, and Operation Data

Covers safety, system limitations, operating conditions, and maintenance recommendations.

Installation Step 1: Mount System Head

Securing the Filter System Head

Instructions for finding a suitable location and mounting the filter system head to the cabinet wall.

Installation Step 2: Mount Auxiliary Faucet

Assemble and Install Auxiliary Faucet

Guide to preparing the faucet, connecting parts, and mounting it securely to the sink or countertop.

Installation Step 3: Connect Tubing and Fittings

Connecting Water Lines and Tubing

Steps for disconnecting water lines, attaching adapters, and connecting tubing to the system.

Installation Step 4: Install Filters and Test

Filter Installation and Leak Testing

Guidance on inserting filters, turning on water, and checking for leaks.

Filter Replacement Reminder

Information on the recommended schedule for replacing filter cartridges.

Troubleshooting Guide

Resolving Common Leaks

Steps to resolve leaks between the system head, filters, fittings, and faucet connections.

Use and Care Information

System Operation and Replacement Parts

Guidance on filter life, flushing, and a list of available replacement parts.