16 17
Using a Britax Infant Car Seat
Attaching a Britax Infant Car Seat
1. Set the parking brake.
2. Line up the adapter on the infant car
seat with the receivers on the stroller.
3. Press down until locked into place.
4. Lift up on both sides of the infant car
seat to ensure that it is secure.
Removing a Britax Infant Car Seat
Refer to your infant car seat user guide for information on the removal
instructions for your specific model.
Removing the Infant Car Seat Receivers
1. Unsnap the receiver strap from the
stroller seat snap.
NOTE: Ensure seat strap stays
attached to stroller frame.
2. Press the button on the receiver and lift
upward.
3. Repeat for the other side.
To Next Page
