18
Removing a Britax Infant
Car Seat
• Set the parking brake
• Lift both release levers on
each seat locking latch at
the same time
NOTE: When removing infant car seat
from stroller, take care that the car
seat does not tip and fall
• Lift upward
NOTE: Once the infant car seat
adapters are installed, they do not
need to be removed. The infant car
seat will fit into the vehicle base while
they are attached
WARNING
• The infant car seat adapters are ONLY compatible with Britax
infant car seats and ONLY models from 2009 or newer
• Attempting to fit them into another infant car seat can
damage the car seat or cause the car seat to fall
• Use the Infant Car Seat Adapter Frame (sold separately) for
infant car seats other than Britax infant car seats
Infant Car Seat Mode
To Next Page
Loading...
