7
NOTE: Left and right wheels are
marked with an L or R and are from
the perspective of standing behind
the stroller
• Hold in the release button in
the center of the wheel and
slide the mounting pin into
the housing on the rear axle
Rear Wheels
• Attaching: slide the pins into
the mounts on the seat until
they lock into place
• Removing: push the release
button on the bottom of the
mounts and pull arm bar out
NOTE: Armbar or cup holders must
always be used to avoid finger
entrapment in the open connectors
Arm Bar
Assembly
To Next Page
Loading...
