25
HOW TO INSTALL
A single twist
is required in
rearward-facing
mode.
Feed seatbelt between restraint
cover and restraint body (see
pages 21-23).
Pull to remove some slack - do
not over tighten when finally
adjusted with the baby
Top tether strap slack
Pull sash portion of
seatbelt to remove
slack.
DO NOT USE RESTRAINT IN REARWARD FACING MODE
WITHOUT STABILISING BAR FULLY EXTENDED.
THE TOP TETHER STRAP MUST ALWAYS BE FITTED WHEN
THE CHILD RESTRAINT IS USED IN A VEHICLE. ALWAYS
ATTACH THE HOOK AND REMOVE THE SLACK.
FITTING SUMMARY
Hook Attachment Clip to
the car's anchor fitting.
BABY USE REARWARD FACING
To Next Page
Loading...
