28
HOW TO SET-UP
SETTING UP THE HARNESS
A. Sit the restraint on flat ground and supported from behind so that it will not tip over.
B. Sit the child comfortably in position.
C. Determine the desired shoulder strap position and select a slot inline or just above the baby's shoulders.
D. Remove the child and move the shoulder straps to the desired position using the methods on the next two
pages.
E. Repeat steps A-C to confirm the correct set-up of the built-in harness.
1. Upper shoulder strap slots. (Forward facing).
2. Middle Upper shoulder strap slots (Forward facing).
3. Middle Lower shoulder strap slots.
4. Lower shoulder strap slots.
5. Shoulder harness strap.
6. Harness tongues and buckle.
7. Crotch Strap Slot
8. Head Roll (if supplied)
1
2
8
3
4
55
6
77
BABY USE REARWARD FACING
To Next Page
Loading...
