ASSURANCE OF COMPLIANCE
This product complies with the essential requirements stipulated in “Article 3 in the R&TTE
1999/5/EC Directive” if it is used for its designated purpose and the following standards have
been applied:
Safety of IT equipment
EN60065:2002 + A1:2006 + A2:2010 + A12:2011
Electromagnetic compatibility
ETSI EN301 489-1 V1.9.2 (2011-09) EN301 489-3 V1.4.1 (2002-08)
Radio
ETSI EN 300 220-2 V.2.4.1 (2012-05)
Health
ETSI EN62311:2008
Additional information:
This product is adapted to the “Low Voltage Directive 73/23/EC”, “EMC Directive 89/336/EC” and
“R&TTE Directive 1999/5/EC (Annex II)” and is labeled with the respective CE marketing.
A. Kurgmann
Britton® / May 2014
R&TTE manufacturer representative
COUNTRIES WHERE THE R&TTE DIRECTIVE APPLIES:
All member states of the EU, plus Switzerland and Norway
INFORMATION FOR USERS
In accordance with European Directives 2002/95/CE, 2002/96/CE and 2003/108/CE on the
restriction of the use of dangerous substances in electric and electronic equipment as well as their
waste disposal.
The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its
useful life, the product must be collected separately from other waste.
Therefore, any products that have reached the end of their useful life must be given to waste
disposal centre specializing in separate collection of waste electrical and electronic equipment, or
given back to the retailer at the time of purchasing new similar equipment, on a one for one basis.
The adequate separate collection for the subsequent start-up of the equipment sent to be
recycled, treated and disposal of in an environmentally compatible way contributes to preventing
possible negative effects on the environment and health and optimises the recycling and reuse of
components making up the apparatus.
Abusive disposal of the product by the user involves application of the administrative sanctions
according to the laws in force.
EN
To Next Page
Loading...
