Brizo Litze 63043LF - User Manual

To Next Page

PULL-DOWN KITCHEN FAUCET

LLAVE DE AGUA/GRIFO EXTRAÍBLE

PARA COCINAS

ROBINET À BEC RÉTRACTABLE POUR

ÉVIER DE CUISINE

LITZE™

Models/Modelos/Modèles

For easy installation of your Brizo

faucet you will need

to READ ALL warnings, care, and maintenance information

before beginning.

Installation Requirements:

Hole Diameter: 1 3/8" ± 1/4"

Maximum Deck Thickness: 3" (76 mm)

• With Escutcheon: 2 3/4" (70 mm)

• Thin Gauged Sinks: Use Thin Deck Aid RP37490

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

05/12/2017 Rev.B

91810

pSpecify Finish/Especifíque el Acabado/Précisez le Fini

63043LFp 63053LFp 63063LFp

63044LFp 63054LFp 63064LFp

RP79275p

Soap/Lotion Dispenser

Dispensador de jabón/loción

Distributeur de savon ou de lotion

RP71451p

Escutcheon

Chapa

Plaque de finition

Accessory Order Only

Solo para ordenar accesorios

Accessoire livrable séparément

www.brizo.com

1-877-345-BRIZO (2749)

brizosupport@brizo.com

Para facilitar la instalación de su grifo Brizo®, antes de

comenzar deberá LEER TODAS las advertencias, infor-

mación sobre el cuidado y el mantenimiento.

Requisitos para la instalación:

Diámetro del agujero: 1 3/8" ± 1/4"

Grosor máximo de la encimera: 3" (76 mm)

• Con la chapa de cubierta: 2 3/4" (70 mm)

• Para encimeras de menos grosor: Use la pieza para

encimeras delgadas RP37490

Pour installer votre robinet Brizo

facilement, vous devez

LIRE TOUTES les mises en garde ainsi que les instructions

d’entretien et de maintenance avant de débuter.

Exigences d’installation :

Diamètre du trou : 1 3/8 po ± 1/4 po

Épaisseur maximale de la plage : 3 po (76 mm)

• Avec plaque de finition : 2 3/4 po (70 mm)

• Éviers minces : utilisez la plaque de renfort RP37490

For product & installation questions, do not return to the store. For additional help, contact customer service.

Si tiene preguntas sobre el producto y su instalación, no acuda a la tienda. Para ayuda adicional, comuníquese con el departa-

mento de servicio al consumidor.

Si vous avez des questions au sujet du produit et de l’installation, ne retournez pas au magasin. Pour obtenir de l’aide, commu-

niquez avec le service à la clientèle.

Need help?

Do you have a question about the Brizo Litze 63043LF and is the answer not in the manual?

The provided document is a comprehensive manual for a Brizo pull-down kitchen faucet, offering detailed information on its function, technical specifications, usage, and maintenance.

Function Description

The Brizo pull-down kitchen faucet is designed for use in kitchens, providing a convenient and versatile water delivery system. Its primary function is to supply water for various kitchen tasks, with the added flexibility of a pull-down spray head. The faucet is available in multiple models, each with distinct aesthetic designs, but sharing core functional features. It can be installed with or without an optional soap dispenser, which is sold separately. The faucet incorporates a backflow protection system to prevent contaminated water from re-entering the potable water supply, meeting ASME A112.18.3 and ASME A112.18.1 / CSA B125.1 standards. This system includes two certified check valves in series, ensuring safe operation. An anti-siphon device is also integrated into the pull-down spout, further enhancing water safety.

Important Technical Specifications

The manual outlines several key technical specifications for the faucet's installation and operation:

Installation Requirements:

Hole Diameter: 1 3/8" to 1 1/2" (35 mm to 38 mm)
Maximum Deck Thickness: 2 7/8" (73 mm)
With Escutcheon: 2 3/4" (70 mm)
Thin Gauged Sinks: Use Thin Deck Aid RP37490 (sold separately)
Optional Escutcheon: RP71451 (sold separately) for 8" centers, 10" centers, or 10" centers with 3 holes.

Component Specifications (referencing part numbers):

Cartridge Assembly: RP75402
Aerator & Wrench: RP91784
Sprayer Assembly: RP91785
Mounting Bracket, Spacer & Nut: RP51685
Inlet Gaskets: RP51243
Plastic Sleeves (for PEX connections): RP50952
Handle Kit: RP91755
Bonnet Nut: RP74776
Set Screw: RP91787
Friction Spacer: RP62875
Spout Assembly: RP91790 (for square spout) or RP91789 (for arc spout) or RP91791 (for angular spout)
Retainer: RP91786
Gasket: RP64074
Wrench: RP40531

Soap Dispenser (Optional):

Recommended spacing between holes: 4" (102 mm)
Hole diameter: 1 1/4" (32 mm)
Maximum deck thickness: 2 1/2" (64 mm)
Body Assembly: RP80919
Pump: RP83779
Base Assembly: RP80917
Nut: RP76489
Bottle: RP76490

PEX Supply Tube Connections: The manual emphasizes the importance of proper PEX supply tube installation to prevent leaks. It recommends using RP50592 plastic sleeves with model and manufacturer specific PEX tubing. The PEX tube should be cut to the correct length, ensuring it is not too short or too long, and that the plastic sleeve is properly seated.

Usage Features

The faucet is designed for user-friendly operation with several features enhancing its utility:

Pull-Down Spray Head: Provides flexibility for various kitchen tasks, allowing the user to direct water precisely where needed.
Single-Handle Operation: Simplifies temperature and flow control.
Optional Soap Dispenser: Integrates seamlessly with the faucet for convenient access to soap.
Backflow Protection System: Ensures the safety of the potable water supply by preventing backflow.
Anti-Siphon Device: Further enhances water safety by preventing siphoning from the pull-down spout.
Adjustable Flow Rate: The aerator can be unscrewed and cleaned to maintain optimal flow. In cases of low flow, the aerator or spray head may need cleaning or replacement.
Easy Installation: The manual provides step-by-step instructions for installation, including guidance for different sink types (thin gauged sinks, standard sinks, and those requiring an escutcheon).

Maintenance Features

Regular maintenance is crucial for the longevity and optimal performance of the Brizo faucet. The manual provides clear instructions for various maintenance tasks:

Cleaning and Care:

Finish Care: The faucet's finish is durable, but care should be taken to avoid harsh abrasives or chemicals. It should be cleaned with a damp cloth and blotted dry with a soft towel.
Aerator Maintenance: If the faucet exhibits very low flow, the aerator should be unscrewed and cleaned. Debris can accumulate in the aerator, reducing water flow.
Spray Head Maintenance: If the spray head leaks from under the handle or from the spout outlet, the internal components (o-rings, springs, and cartridges) may need inspection or replacement. The manual provides detailed steps for disassembling and reassembling the spray head.
Cartridge Replacement: In cases of persistent leaks or drips, the cartridge assembly (RP75402) may need to be replaced. The manual outlines the process for removing the handle, bonnet nut, and replacing the cartridge.
PEX Connection Maintenance: Periodically check all connections for leaks. If leaks are detected, ensure that the plastic sleeves are properly seated and that the connections are tight. Do not overtighten.
Soap Dispenser Maintenance (if applicable): If the soap dispenser stops pumping, it may need to be primed or cleaned. The manual provides instructions for disassembling the dispenser for cleaning and refilling.

Troubleshooting: The manual includes a section on troubleshooting common issues such as leaks, low flow, and problems with the soap dispenser, offering solutions and guidance on when to contact customer service. It also emphasizes the importance of using genuine Brizo replacement parts for repairs to maintain the product's warranty and performance.

The document concludes with warranty information, outlining the coverage for electronic parts, finishes, and mechanical components, and providing contact details for customer service in the US, Canada, and Mexico.