To Next PageTo Next Page
Need help?Do you have a question about the Brizo Vuelo Series and is the answer not in the manual?
General| Brand | Brizo |
|---|---|
| Series | Vuelo |
| Category | Kitchen & Bath Fixtures |
| Handle Type | Lever |
| ADA Compliant | Yes |
| Finish | Chrome |
| Spout Height | Varies by model |
| Spout Reach | Varies by model |
| Warranty | Limited Lifetime Warranty |
| Number of Handles | 1 or 2 (depending on model) |
Screw the threaded fitting of hose into spray head to prevent hose pull-out. Insert hose guide.
Feed hose assembly through the spout and hub.
Slide spout assembly onto hub, ensuring smooth operation and avoiding pinched fingers.
Place gasket on trim ring groove and trim ring on spout hub before inserting supply tubes.
Install mounting bracket and nut onto the mounting shank using a wrench.
Instructions for optional 10" escutcheon installation using studs, nuts, and brackets.
Ensure fittings are debris-free; secure metal nut to supply valve connection.
Instructions for shortening PEX supply tubing, using sleeves and nuts for leak-free joints.
Solutions for issues like perpendicular cuts, short tubing, or lost sleeves/nuts.
Turn on water, pull hose, hold sprayer in sink, and run mixed water for one minute to flush.
Verify sprayer locks into position, detaches easily, and switches between aerator and spray modes.
Guide for installing the soap dispenser, including spacing, head/body separation, and pump attachment.
Instructions for setting the handle limit stop to control hot water range for safety.
Troubleshoot low flow by unscrewing the hose from the spray head and cleaning debris.
Diagnose handle leaks by checking the handle, cap, O-ring, and bonnet nut tightness.
For persistent leaks, shut off water supplies and replace the valve cartridge.
Stop water supplies and tighten the bonnet nut for leaks from the spout outlet.
Simple cleaning with a damp cloth and soft towel to preserve the finish.
Information on the faucet's integrated backflow protection system compliant with ASME standards.
Details warranty coverage for parts, finishes, and electronic components, and exclusions.
