Brizo Litze 64043LFP User Manual

PULL-DOWN SMARTTOUCH
®
KITCHEN
FAUCET
LLAVE DE AGUA/GRIFO EXTRAÍBLE PARA
COCINAS SMARTTOUCH
®
ROBINET À BEC RÉTRACTABLE POUR
ÉVIER DE CUISINE SMARTTOUCH
MC
1
LITZE™ & SOLNA
®
Models/Modelos/Modèles
For easy installation of your Brizo
®
faucet you will need
to READ ALL warnings, care, and maintenance information
before beginning.
Installation Requirements:
Hole Diameter: 1 3/8" ± 1/4"
Maximum Deck Thickness: 3" (76 mm)
• With Escutcheon: 2 3/4" (70 mm)
• Thin Gauged Sinks: Use Thin Deck Aid RP37490
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
10/28/2019 Rev. K
92563
pSpecify Finish/Especifíque el Acabado/Précisez le Fini
64043LFp 64053LFp 64063LFp
64044LFp 64054LFp 64064LFp
RP79275p
Soap/Lotion Dispenser
Dispensador de jabón/loción
Distributeur de savon ou de lotion
RP71451p
Escutcheon
Chapa
Plaque de finition
Accessory Order Only
Solo para ordenar accesorios
Accessoire livrable séparément
For product & installation questions, do not return to the store. For additional help, contact customer service.
Si tiene preguntas sobre el producto y su instalación, no acuda a la tienda. Para ayuda adicional, comuníquese con el departa-
mento de servicio al consumidor.
Si vous avez des questions au sujet du produit et de l’installation, ne retournez pas au magasin. Pour obtenir de l’aide, commu-
niquez avec le service à la clientèle.
www.brizo.com
1-877-345-BRIZO (2749)
brizosupport@brizo.com
?
Para facilitar la instalación de su grifo Brizo®, antes de
comenzar deberá LEER TODAS las advertencias, infor-
mación sobre el cuidado y el mantenimiento.
Requisitos para la instalación:
Diámetro del agujero: 1 3/8" ± 1/4"
Grosor máximo de la encimera: 3" (76 mm)
• Con la chapa de cubierta: 2 3/4" (70 mm)
• Para encimeras de menos grosor: Use la pieza para
encimeras delgadas RP37490
Pour installer votre robinet Brizo
®
facilement, vous devez
LIRE TOUTES les mises en garde ainsi que les instructions
d’entretien et de maintenance avant de débuter.
Exigences d’installation :
Diamètre du trou : 1 3/8 po ± 1/4 po
Épaisseur maximale de la plage : 3 po (76 mm)
• Avec plaque de finition : 2 3/4 po (70 mm)
• Éviers minces : utilisez la plaque de renfort RP37490
64020LFp
64920LFp

Brizo Litze 64043LFP Specifications

General

Brand	Brizo
Collection	Litze
Model Number	64043LFP
Product Type	Kitchen Faucet
Handle Style	Lever
Number of Handles	1
Installation Type	Deck Mount
Number of Holes Required	1
Spray Type	Pull-Down
Material	Brass
ADA Compliant	Yes
Finish	Polished Nickel

Summary

Installation Requirements

Hole Diameter

Specifies the required hole diameter for installation.

Maximum Deck Thickness

Defines the maximum thickness of the deck for installation.

Optional Escutcheon Installation

Escutcheon Placement

Instructions for placing the escutcheon and gasket under the faucet base.

Thin Deck Installation

Deck Aid Usage

Guidance on using the deck aid for thin gauged sinks.

Check Valve and Custom Fit Connection Installations

Check Valve Installation

Instructions for installing check valves and securing nuts.

Custom Fit Connections

Guidance for custom fit installations using plastic sleeves and nuts.

Potential Problems and Remedies

Troubleshooting common issues with custom fit connections.

Battery Installation and Placement

Battery Type Information

Details on AA and C battery types and their lifespan.

Battery Placement Guidance

Instructions on placing batteries in the holder and securing it.

Backflow Protection System

System Compliance and Requirements

Details on system compliance with ASME standards and local codes.

Cleaning and Care

Cleaning Instructions

Gentle cleaning methods to avoid damaging the product finish.

Solenoid Troubleshooting

Troubleshooting Low Water Flow

Steps to address low water flow by cleaning aerator and filter.

Troubleshooting Water Flow and Solenoid

Diagnosing problems with water flow from the solenoid and faucet outlet.

Troubleshooting Spout/Indicator Issues

Addresses issues with spout indication, touch sensitivity, and connections.

Maintenance

Low Flow Troubleshooting

Steps to resolve low water flow by cleaning aerator and filter.

Handle or Spout Leakage

Instructions to turn off water and reassemble handle components.

Soap Dispenser Installation

Dispenser Assembly and Filling

Steps for assembling the dispenser body, bottle, pump, and head, plus filling instructions.

Limited Warranty

Warranty Coverage and Exclusions

Details parts/finish coverage, electronic parts, and what is not covered.

Obtaining Warranty Service

Instructions on how to make a warranty claim and contact information.

Legal Limitations and Rights

Includes limitations on implied warranties and consequential damages.