To Next PageTo Next Page
Need help?Do you have a question about the BRK electronic 7030BSLA and is the answer not in the manual?
Single device for smoke/CO alarm and strobe light, requiring one electrical box for three functions.
Distinguishes between smoke and carbon monoxide with separate flash patterns.
Powerful LED strobe provides visual warning for hearing impaired, sync-capable.
Provides 10-year backup power for alarm functions without battery replacement.
Ensures 360-degree access to the smoke sensing chamber for direct detection.
Audible notification indicating the alarm needs replacement after 10 years.
Wire-in, 120V AC 60Hz combination photoelectric smoke and CO alarm with 177 candela LED strobe.
Details dimensions, operating voltage, temperature, humidity, audio alarm, and interconnection capabilities.
Conforms to electrical codes, specifies wire gauge and voltage for interconnected units.
Identifies parts of the alarm including mounting bracket, wiring connections, and power connector.
The BRK Model 7030BSLA (Cat. 1038871) is a professional-grade, AC-powered combination alarm with a 10-year sealed lithium battery backup, designed for residential and institutional applications. This device integrates a photoelectric smoke sensor, an electrochemical carbon monoxide (CO) sensor, and a powerful 177 candela LED strobe light into a single unit, requiring only one electrical box for installation. This integration simplifies installation, reduces costs, and provides comprehensive protection against smoke, CO, and fire, with a visual warning for individuals who are deaf or hard of hearing.
The primary function of the 7030BSLA is to detect the presence of smoke and carbon monoxide and to alert occupants through both audible and visual signals. The photoelectric smoke sensing chamber is designed to detect visible particles of combustion, often associated with smoldering fires, while the electrochemical CO sensor detects the presence of carbon monoxide, a colorless, odorless, and poisonous gas.
A key feature is the integrated 177 candela LED strobe light, which provides a powerful visual warning. This strobe is particularly beneficial for deaf and hard of hearing individuals, ensuring they are alerted to potential dangers. The device incorporates a "Smart Strobe" feature, which uses separate flash patterns to distinguish between smoke/heat and carbon monoxide dangers. This differentiation helps users understand the specific type of threat, allowing for a more informed response. For instance, in a smoke or heat event, the strobe flashes at approximately one flash per second. In a CO event, it flashes four times rapidly, followed by a three-second pause, repeating this pattern. This visual distinction is crucial for effective communication of the hazard.
The strobe light also boasts synchronization capabilities. When multiple 7030BSLA units are installed and interconnected, their strobes will flash in unison, creating a more impactful and coordinated visual alert throughout the premises. The strobe flashes at an average rate of 60 times per minute (1 Hz).
The alarm is equipped with an 85dB horn, which provides a loud audible warning. The horn patterns also differ for smoke and CO. For smoke, it emits three long beeps, a pause, and then repeats. For CO, it emits four rapid beeps, a pause, and then repeats.
The device is AC-powered, operating on 120V AC, 60Hz, and includes a sealed 10-year lithium battery backup. This battery ensures continuous operation of the smoke and CO alarm functions for the entire 10-year life of the alarm, even during power outages. The sealed nature of the battery prevents tampering and removal, ensuring consistent protection.
The 7030BSLA is designed for ease of use and comprehensive monitoring. It features a green LED that indicates AC power is present, flashing once per minute during normal operation. During an alarm condition, a red LED flashes in conjunction with the audible horn and strobe light.
The device includes a full-function test button, which allows users to verify that all alarm functions are working correctly. Pressing and holding this button simulates a smoke condition, triggering the horn, strobe, and red LED.
Two latching features enhance the alarm's utility, especially in multi-unit installations. The "Alarm Latch" visually identifies the initiating alarm unit with a blinking red LED pattern, even after the alarm condition has subsided. This is invaluable in larger residences or institutions where pinpointing the source of an alarm quickly can be critical. The "End of Life / Low Battery Latch" visually identifies which specific unit is in a low battery or end-of-life condition, simplifying maintenance.
The 7030BSLA also incorporates two silence features. The "Alarm Silence" function allows users to temporarily quiet nuisance alarms for approximately 9 minutes for smoke alarms and 4.5 minutes for CO alarms. This is useful for situations like cooking smoke that might trigger the alarm without a real fire threat. The "End of Life Silence" feature allows users to silence the low battery or end-of-life chirps for up to 8 hours, providing flexibility before replacement.
The alarm is inter-connectable with up to 18 compatible devices, including other First Alert or BRK smoke, CO, and heat alarms. Of these, a maximum of 12 can be smoke alarms. This interconnectivity ensures that when one alarm detects a hazard, all interconnected alarms sound, providing a synchronized warning throughout the property.
The device features "OptiPath 360 Technology™," which provides 360 degrees of direct access to the smoke sensing chamber, enhancing detection capabilities.
The 7030BSLA is designed for minimal maintenance over its lifespan. The 10-year sealed lithium battery eliminates the need for battery replacements throughout the alarm's operational life.
The unit provides an "End of Life Signal," an audible notice that the alarm needs to be replaced after 10 years of service. This signal, typically five short chirps with five green LED flashes once per minute, ensures that users are aware when the device has reached the end of its effective life and needs to be replaced to maintain optimal protection.
The sensing chamber is fully screened to resist the entry of small insects, which helps reduce the probability of nuisance alarms caused by insect interference.
For installation, the device includes a convenient twist-lock mounting bracket with backup battery activation, simplifying the mounting process. A "Quick Connect" wiring harness further streamlines electrical connections. A dust cover is also included to protect the unit during construction or renovation.
General| Type | Smoke Alarm |
|---|---|
| Test Button | Yes |
| LED Indicator | Yes |
| Hush Feature | Yes |
| Battery Type | 9V |
| Alarm Volume | 85 dB |
| Interconnect Capability | Yes |
| Alarm Sound | Temporal 3 |
| LED Indicator Details | Red LED indicates alarm or power |
| Mounting | Ceiling or Wall |
| Compliance | UL 217 |
