Broadcom BCM2046 User Manual

Bluetooth Module for 3D TV
Version 1.0 Samsung Electronics page 1 of 6
Manual for BT module
Samsung
Copyright notice
The information furnished herein by Samsung is proprietary and confidential and it shall not be
duplicated, published or disclosed to any third party in whole or in part without the prior written
consent of Samsung.
Version Number
Version No. Date Comments
1.0 2010.10.12 First issued
Revision History
Revision No. Date Comments

Broadcom BCM2046 Specifications

General

Brand	Broadcom
Model	BCM2046
Category	Control Unit
Language	English

Summary

Introduction

Hardware Architecture

Main Chipset Information

Details the main chipset used, including vendor and part number.

Circuit Block Diagram

Presents the internal and external block diagram of the Samsung BT module.

Module Output Power Information

Provides information on the module's output power class, TX power, and data rate.

Operational Description

RF Frequency Time Base

Explains the clock reference for the RF frequency.

Synthesizer Details

Describes the synthesizer's role in providing the LO signal using PLL.

Transmission Process

Details the base-band processing, modulation, and data rates for transmission.

Receiver Process

Explains how RF signals are received, down-converted, and demodulated.

Baseband Processing Modes

Covers channel selection and supported data modulation modes like 2FSK and DQPSK.

Power Control Level

Specifies the maximum transmit power for class 2 operation.

Transmit/Receive Switch

Notes the presence of a T/R switch and that end-users cannot select power settings.

Application for 3D TV

Pin Description

Pin Functionality

Details the function of each pin on the module, including Reset, Vcc, USB interfaces, and sync signals.

Installation

Brief System Overview

Notice

FCC Compliance and RF Exposure

Details FCC compliance, interference rules, and RF exposure requirements for safe operation.

Information for Canadian Users