8
WWW.BROADWAY-LIMITED.COM
sounds coming from the subwoofer
within a few seconds of starting the
locomotive. If you do not hear the
subwoofer after the rst 10 seconds
of running the locomotive, you may
need to position the receiver and
the locomotive closer together. The
locomotive can typically transmit
about 15 feet, but may need to
be closer to the receiver to begin
transmitting. Positioning the receiver
near the height of the track will
improve reception.
When running a locomotive, adjusting
the volume of the locomotive with
Function Key 8 or with the DC Master
will also adjust the volume played
through the subwoofer.
Setting CV214 for a locomotive will
adjust the subwoofer volume for that
locomotive. The range is 0-255. A
To Next Page
Loading...