9
ROLLING THUNDER
TM
higher number is louder. The default
is 128.
If you are running one locomotive at
a time on a layout less than 15 feet
long, you probably don’t need to
read the rest of this manual.
Using Multiple Locomotives
The subwoofer can only play the
sounds of one locomotive at a time.
Once the receiver locks onto the rst
locomotive, it will continue to play
the sounds from that locomotive
until that locomotive moves out of
range or is turned off, after which the
next available locomotive will begin
playing through the subwoofer. If
more than one locomotive is running
at the same time, each locomotive
must be set to a unique transmit
channel. There are 29 channels,
To Next Page