Need help?Do you have a question about the Broan CLSC2 Series and is the answer not in the manual?
Adherence to manufacturer instructions, qualified personnel, proper ventilation, and wiring safety.
Ensuring adequate air for combustion, preventing backdrafting, and using metal ductwork.
Avoiding unattended high heat cooking, cleaning fans, and using proper cookware to prevent grease fires.
Procedures for smothering flames, using extinguishers, and general operating cautions.
Operating blower speeds and light intensities using buttons or switches.
Understanding and resetting the filter cleaning reminder indicator lights.
Proper cleaning of the fan blade and maintenance of the motor.
Guidelines for cleaning grease filters and replacing non-ducted filters.
Methods for cleaning stainless steel and painted finishes, including product recommendations.
List of essential tools and accessories required for the installation process.
Guidance on planning ductwork runs and connecting ductwork sections securely.
Inventory of all parts included in the package for CLDA1 and CLSC2 series.
Removing protective film, grease filters, EZ1 brackets, and the wiring cover.
Detaching the damper assembly from the hood for preparation.
Removing the 7" round duct plate and electrical power cable knockout.
Removing the recirculation cover plate for non-ducted installations.
Removing the appropriate knockout plate for vertical, horizontal, or round ducting.
Attaching the damper assembly or 7" round duct plate to the hood opening.
Identifying cabinet types (framed/frameless) and EZ1 system applicability.
Using templates to mark ductwork and electrical access hole locations.
Drilling pilot holes and cutting openings for wiring and ducting.
Installing mounting brackets onto framed cabinet side frames.
Securing installation brackets to frameless cabinet side frames and bottom.
Running power cable and temporarily hanging the hood on EZ1 brackets.
Connecting ductwork securely to the hood for ducted installations.
Securing the hood to EZ1 brackets in framed cabinets using metal screws.
Securing the hood to frameless cabinets using wood screws.
Diagrams for placement of ductwork and electrical cutouts for standard installation.
Installing mounting screws into cabinet or shims for standard installation.
Running power cable and hanging the hood onto mounting screws.
Connecting ductwork to the hood in standard installations.
Connecting house power cable to range hood wiring (black, white, ground).
Reinstalling the wiring cover securely after making connections.
Aligning and installing LED bulbs into the lamp sockets securely.
Reinstalling grease filters or installing new non-ducted filters.
General| Number of Speeds | 2 |
|---|---|
| Venting Options | Ducted |
| Material | Stainless Steel |
| Installation | Under Cabinet |
| Type | Under Cabinet |
| Width | 30 inches |
| Filter Type | Aluminum Mesh Filter |
| Depth | 19.75 inch |
To Next Page
