Brock MBP2-A - User Manual

2005/06/02
X10038 Rev. LImprimé au Canada
Conservez ce manuel pour références ultérieures.
Attention : Ne pas altérer
votre unité ou ses contrôles.
Appeler un technicien
qualifié.
Modèles:
Wolseley Canada
CCC-A
MBP1-A
MBPF-A
MBP2-A
MBP-U
APPAREIL DE CHAUFFAGE
CENTRAL AU MAZOUT
DNS
-
0757 Rév.A
DNS
-
0758 Rév.A
DNS
-
0759 Rév.A
CCC-A
MBPF-A
MBP1-A, MBP2-A
& MBP-U

Summary

DIAGRAMME ÉLECTRIQUE

LISTE À BULLES

PART 1 INSTALLATION

1.1 SAFETY LABELLING AND WARNING SIGNS

Identifies hazard levels: DANGER, WARNING, CAUTION. Understand their meaning.

1.2 SAFE INSTALLATION REQUIREMENTS

Rules for safe installation by qualified persons, conforming to codes.

1.3 POSITIONING THE FURNACE

Guidelines for furnace placement and clearance from combustibles.

1.4 VENTING

Requirements for venting the furnace with chimney or power venter.

PART 2 OPERATION

2.1 SEQUENCE OF OPERATION

Describes the step-by-step process for burner ignition and operation.

2.2 CHECKS AND ADJUSTMENTS

Procedures for initial start-up and yearly maintenance testing.

2.2.4 SMOKE AND CO2 TESTING

Steps to perform smoke and CO2 tests for proper combustion.

2.2.5 SUPPLY AIR TEMPERATURE RISE TEST

Procedure to measure and adjust air temperature rise.

PART 3 MAINTENANCE

3.1 GENERAL PREVENTIVE MAINTENANCE

Best practices for avoiding expense and inconvenience via regular checks.

3.1.1 HEAT EXCHANGER MAINTENANCE

Inspection and cleaning procedures for the heat exchanger.

3.1.2 REFRACTORY FIRE POT

Care and replacement guidelines for the refractory fire pot.

3.1.3 BVSO CLEANING

Annual inspection and maintenance of the BVSO system.

Brock MBP2-A Specifications

General

Brand	Brock
Model	MBP2-A
Category	Furnace
Language	English