Brock MBPF-A - User Manual

2005/06/02
X10038 Rev. LImprimé au Canada
Conservez ce manuel pour références ultérieures.
Attention : Ne pas altérer
votre unité ou ses contrôles.
Appeler un technicien
qualifié.
Modèles:
Wolseley Canada
CCC-A
MBP1-A
MBPF-A
MBP2-A
MBP-U
APPAREIL DE CHAUFFAGE
CENTRAL AU MAZOUT
DNS
-
0757 Rév.A
DNS
-
0758 Rév.A
DNS
-
0759 Rév.A
CCC-A
MBPF-A
MBP1-A, MBP2-A
& MBP-U

Summary

PART 1 INSTALLATION

1.1 Safety Labelling and Warning Signs

Understanding DANGER, WARNING, and CAUTION labels for hazard identification and safety.

1.2 Safe Installation Requirements

Ensuring proper installation by qualified personnel and adherence to safety codes and regulations.

1.2.1 Safety Rules

Guidelines for safe operation, maintenance, and hazard prevention for the heating unit.

1.4 Venting

1.5 Air for Combustion

Ensuring adequate supply of fresh air for combustion and ventilation, considering home improvements.

1.8 Blocked Vent Shut-off (BVSO)

PART 2 OPERATION

2.1 Sequence of Operation

Step-by-step process of the burner and blower operation during heating cycles.

2.2 Checks and Adjustments

Procedures for initial start-up, testing, and adjustments for optimal furnace performance.

2.2.2 Restart in Case of Burner Failure

2.2.4 Perform the Smoke; CO2 Test

Steps for conducting smoke and CO2 tests to ensure proper combustion and air settings.

2.2.5 Perform the Supply Air Temperature Rise Test

Method for measuring and adjusting the air temperature rise across the furnace.

2.2.6 Vent Temperature Test

2.2.7 Fan Limit Adjustment

PART 3 MAINTENANCE

3.1.1 Heat Exchanger

Inspection and cleaning procedures for the heat exchanger to remove soot accumulation.

3.1.2 Refractory Fire Pot

3.1.3 Blocked Vent Shut-off (BVSO) Cleaning

PART 4 INFORMATION

Start-Up Test Results

Section for recording test results, burner adjustments, and performance data after installation.

Brock MBPF-A Specifications

General

Brand	Brock
Model	MBPF-A
Category	Furnace
Language	English