4
Step 4b
Ensure that the locking plate
straddles both hinge plates and
firmly tighten the main frame hinge
clamp.
Step 5
Lift the bike by the saddle allowing
the rear frame & wheel to rotate
into their unfolded position.
Depending on the rear frame clip
setting [see page 8], the rear frame
may lock in place.
Step 6
Your Brompton is now unfolded and
ready to ride.
Step 4a
Standing to the left of the bike, right hand on the saddle,
left hand on the handle bar stem (as pictured), rock the
bicycle back slightly and unhook the front wheel from
the rear frame. Then, using a “stirring” action, front wheel
facing forward, move the front wheel out and round to its
unfolded position.
To Next Page
Loading...
