FOLDING AND UNFOLDING
Follow the unfolding and folding instructions provided to be sure you use your Brompton correctly.
UNFOLDING
Step 1
Unfold the left hand pedal by
swinging the pedal body outwards
and the latch plate locks the pedal
in place.
Step 2b
Make sure the hinge clamp plate
straddles both hinge plates and
tighten firmly.
3
Step 2a
Unfold the handlebar into the upright position as shown.
Step 3
Undo the quick release lever and pull the seat pillar and
saddle up, either until it comes to a stop, or is at a height
that suits you. Tighten the quick release lever; it should be
wrapped around the outside of the seat pillar touching the
frame in its closed position. The saddle should be pointing
straight ahead.
English
To Next Page
Loading...
