Need help?Do you have a question about the brondell SWASH DR801 and is the answer not in the manual?
General| Type | Bidet Toilet Seat |
|---|---|
| Water Temperature Control | Yes |
| Dryer | Yes |
| Heated Seat | Yes |
| Remote Control | Yes |
| Self-Cleaning Nozzle | Yes |
| Energy Saving Mode | Yes |
| Nozzle Material | Stainless Steel |
| Water Heating | Tankless |
| Deodorizer | Yes |
| Material | Plastic |
| Nozzle Position Adjustment | Yes |
| Power Source | Electric |
Explains DANGER, WARNING, and CAUTION symbols for hazard identification.
Core safety rules for power, cords, and outlets.
Guidelines on water, moisture, children, and senior users.
Precautions for seat cover use and general product operation.
Safety regarding cords, air openings, and cleaning agents.
Precautions for water supply connections and product storage.
Importance of using a grounded GFCI outlet for electrical safety.
Risks of improper grounding and consulting electricians.
Guidance on using adapters when a grounded outlet is unavailable.
Steps for connecting the grounding wire to the product and outlet.
Overview of wash, dryer, and nozzle features.
Details on heated seat, nightlight, and deodorizer.
Dimensions for elongated and round toilet seats.
Required distance between toilet mounting holes.
Labeled diagram of the bidet seat's primary parts.
Identification of water inlet, drain, and mounting parts.
List of mounting bolts, washers, and nuts.
List of T-valve and bidet hose components.
Guidance on installation video and bolt hole spread.
Checks for concealed fill valves and rigid water supply lines.
Steps for removing existing seat and turning off water supply.
Instructions for T-valve connection and water supply line hookup.
Steps to attach the bidet seat to the mounting plate.
Connecting the bidet hose and plugging into power.
Procedure for installing an external inline water filter.
Identifies buttons for wash modes, drying, and stopping operations.
Identifies controls for temperature, pressure, and special modes.
Explains the specific function of each control panel button.
How to adjust seat temperature, water temperature, and pressure.
How to operate wash cycles, oscillation, and pulse.
How to activate and adjust the warm air dryer.
Explanation of energy-saving Eco Modes and Sitz Bath mode.
How to activate and deactivate the seat sensor override.
How to use Silent, Sleep, and Nightlight features.
Procedures for factory reset and automatic tank draining.
Details on model, voltage, power, and water pressure.
Specifications for wash performance, seat heating, and safety devices.
Instructions for cleaning and removing the bidet seat.
Step-by-step guide for cleaning the bidet nozzle.
How to clean the internal mesh water filter.
Guidelines for storing the product during non-use.
Basic checks and common issues like bidet not working.
Solutions for product shutting off and nozzle malfunctions.
Solutions for low water flow and temperature issues.
Troubleshooting for wash features not working and heating failures.
Addressing water leaks from T-valve, hose, seat, and tank plug.
Solutions for seat not heating and blinking temperature lights.
Details of the warranty for residential use.
Circumstances not covered by the warranty and legal rights.
Contact details for customer service and support.
Information on where the product is made and warranty record keeping.
To Next Page
