15
Shutter speed (half step display)
Aperture value (Program AE mode and
Aperture-priority AE mode), proper
exposure deviation with + and
- (M mode)
Shooting mode display (P:program AE,
A:aperture-priority AE,M:manual)
AE.L (exposure memory) ON display.
Shutter open status indicator
Exposure compensation display is used
when the compensation dial is set to
anything other than “0”
Speedlight ready display
Not-ready-for-shooting indicator
Battery warning:blinks when battery
power is low
3. Shooting 3-3 Shutter release button
3-3-2 Viewfinder Display
The viewfinder contains the following displays:
1. An LCD panel to the left of the viewing field,
2. View frame bright frame display, and in its center, a focusing frame
with dual superimposed images.
Note: The bright frame displays shift automatically corresponding to
65mm or 100mm lens when attached.
3. Shooting 3-4 Exposures
3-4-1 Shutter Dial and Lens Aperture Operations
Photographing modes and the shutter speeds can be selected on the
shutter speed dial located on the top of the Bronica RF 645 main
camera body. "P" represents Program AE mode, "A" designates
Aperture-priority AE mode, while "B" indicates bulb mode, in which
the shutter remains open as long as the shutter release button is
pressed. The shutter dial is locked in these three positions to prevent
unintentional changing of the setting.
Press down on the shutter speed dial lock release button while rotat-
ing the shutter dial between these three shooting mode settings.
To Next Page
Loading...
Need help?
General