BRONKHORST E-7000 Series - Page 8

BRONKHORST HIGH-TECH B.V.
page 8 9.17.017
Modules with blind front (14 TE) Code
Blind front only 01
Blind front + power supply (linked to module with mains entr.) 03
Blind front + power supply + mains entrance (incl. cable) + FLOW-BUS connection 04
Blind front + power supply + RJ45 conn. for +15Vdc supply voltage + mains entrance
(incl. cable)
05
Blind front + power supply + RJ45 conn. for +15Vdc supply voltage (linked to module
with mains entrance)
06
Modules with single channel Readout/Control-panel (14 TE) Code
R/C-panel + power supply + mains entrance (incl. cable) analog model 10
R/C-panel + power supply (linked to module with mains entry) analog model 11
R/C-panel (linked to module with power supply) analog model 12
R/C-panel + power supply + mains entrance (incl. cable) digital model 13
R/C-panel + power supply (linked to module with mains entry) digital model 14
R/C-panel (linked to module with power supply) digital model 15
Modules with R/C-panel and Ex-proof functions (14 TE) ** Code
R/C-panel + transmitter supply unit for MFM/EPT (Ex-proof) 20
R/C-panel + supply for MFM/EPT (Ex-proof) + valve with XB-coil 21
R/C-panel + supply for MFM/EPT (Ex-proof) + valve with XC-coil 22
Modules for temperature control for CEM-systems (14TE) Code
Temp. R/C-panel + 10 W supply for low capacity CEM-system for W-101 / W-102 33
Temp. R/C-panel + 10 W supply for low capacity CEM-system for W-202 34
Temp. R/C-panel excl. supply for high capacity CEM-system * for W-303
35
R/C-panel (E7000)+ 1000W supply / 230Vac operation for W-303
36
R/C-panel (E7000)+ 1000W supply / 120Vac operation for W-303
37
Blind front + Flow-Bus/RS232 Interface 40
Blind front + Flow-Bus/Profibus-DP Interface 41
None 00
Other/Specify 99
* 1000W power supply will be supplied and charged separately
** Always in combination with powermodule