BROOD Nitro V2PX Operations Manual V2.2 Eng
2
Safety Regulations
Never allow water to come into contact with any of the electrical parts of the Nitro Coffee machine:
There is a danger of creating a short circuit.
Intended Use
The Nitro Coffee machine is intended to be used in cafes, restaurants, & pantries. It dispenses liquid
from any pressurized or non-pressurized container (ideal for use with a Bag in Box (BiB)) by drawing
liquid, infusing it with atmospheric nitrogen and chilling it to 2°C. Do not use boiling or unfiltered
liquids. The Nitro V2PX must only be operated by a trained person. The appliance is not to be used by
persons (including children) with reduced physical, mental or sensory abilities or with scarce
experience and/or expertise, unless they are supervised by a person responsible for their safety, or
they are instructed by this person on how to properly use the Nitro Coffee machine.
Power Supply
The Nitro Coffee dispenser must be connected to the power supply in accordance with its
specifications. Only connect the Nitro V2PX with the specified supply voltage.
Power Cord
Never use the Nitro Coffee machine if the power cord is defective. Report any defects in the cord
and/or plug to the service provider immediately. Do not pass the power cord around corners, over
sharp edges or over hot objects and keep it away from oil. Do not use the power cord to carry or pull
the Nitro Coffee machine. Do not pull out the plug by the power cord nor touch it with wet hands. Do
not let the power cord hang freely from tables or shelves.
For the Safety of Others
Ensure that children cannot play with the Nitro Coffee dispenser and/or the packaging materials.
Observe the warning and safety instructions on the electrical components and in this manual.
Improper use of the Nitro Coffee machine such as opening the Nitro Coffee machine during operation,
incorrectly operating the Nitro Coffee machine, or not following standard guidelines for operating
electrical equipment may lead to injury.
Fire Safety Precautions
In case of fire, use carbon dioxide (CO2) extinguishers. Do not use water or dry powder extinguishers.
Suitable Location for Operation and Maintenance
The Nitro Coffee machine should be installed in accordance with the safety regulations in force at the
time of installation. Use the Nitro Coffee machine in an environment between 7°C and 32°C. Make
sure it is a dust free environment. Avoid placing open flames and/or incandescent objects near the
Nitro Coffee machine to avoid melting or other damage to the dispenser housing. If the dispenser has
been exposed to such conditions alert the service provider, who will carry out a safety check.
Storing the Nitro Coffee machine
If the Nitro Coffee machine is to remain inactive for a long time, turn it off and unplug it. Store the
Nitro Coffee machine in a dry place, out of the reach of children. Make sure the storage area is
between 2°C and 37°C Keep it protected from dust and dirt.
Repairs / Maintenance
In case of failure, problems or a suspected fault resulting from a fall, immediately remove the plug
from the power socket and alert the service provider or specialised technician. Never attempt to
operate the Nitro Coffee machine if it is faulty. Please report any fault in the Nitro Coffee dispenser to
your service provider. Only the service provider and/or technician may carry out servicing operations
and repairs on the Nitro Coffee machine, unless otherwise informed. Any repair of the dispenser must
be done only when it is switched off and it is ascertained that there is no electric current. All spare
To Next Page
Loading...