Product Manual - RFID Reader LF40C THR 20
Chapter 4
Safety Instructions
4.5 Additional information
■ Read and understand all safety and product manuals prior to installing
and operating the device.
■ This documentation was written for specifically trained personnel.
Installation, operation and troubleshooting may only be carried out by
specifically trained personnel.
■ Retain these instructions. Keep this documentation in a location that is
accessible to all personnel involved with the installation, use and
troubleshooting of the device.
■ Follow all warnings. Follow all warnings on and in the device and in the
documentation.
■ Install the device only in accordance with the manufacturer's
instructions.
■ Use only the accessories and cables from the manufacturer.
■ Troubleshooting that is not described in Chapter Service and
Troubleshooting may only be performed by the manufacturer.
■ People with hearing aids should be aware that the radio signals emitted
by the device can cause annoying noises in the hearing aid.
■ Do not connect the device to power supplies such as normal household
electrical outlets. The device should only be connected to power supplies
as specified in this document.
■ When removing a cable, only pull on the plug and not on the cable.
Connect cable connectors straight and carefully to avoid damaging the
contacts.
■ Never overbend the antenna cables or subject these to mechanical
forces.
■ When replacement parts are required, use only the replacement parts
that were specified by the manufacturer. Unauthorized spare parts can
result in fire, electric shock or other hazards.
To Next Page
Loading...