17
OPERATING THE PROJECTOR
SETUP
The projector can be powered using the included AC adapter or
the built-in battery.
•To power the projector with AC power, connect the AC
adapter to the projector’s DC input and plug the other end
into an outlet. Once connected, the battery indicator lights
will illuminate on the projector showing the amount of battery
power remaining.
•To power the projector with the built-in battery, simply turn
the projector on. To check the remaining battery life of the
projector press the power button briefly.
IMPORTANT: Fully charge the battery before first use (approx. 4-5
hours).
CONNECT A SOURCE DEVICE
The projector can be connected to a variety of HDMI compatible
devices via a wired connection and to some smartphones and
tablets via a wireless connection.
To Next Page
Loading...
