20
Apple Devices
a. For Apple devices, download the Projector App from the
App store.
b. On the projector, keep pressing the mode button until you
see the Apple Wireless screen displayed.
c. Go to Settings on your iOS device and select Wi-Fi.
d. Select the Brookstone projector from the list of devices.
and enter the password 12345678.
e. Launch the Projector App and select the media you would
like to view.
AUDIO
If desired, connect a speaker to the 3.5mm audio out jack. If no
external speaker is connected, the projector’s 2 internal 1-watt
speakers will be used for audio.
ADJUSTING THE VOLUME
Touch the mode control area to activate the volume controls.
Use the volume up and volume down control areas to adjust to
the preferred volume level.
To Next Page
Loading...
