7
2. Place the bottom of the Wine Opener on the top of the wine bottle. Ensure
that it remains as upright as possible at all times. If you hold the wine opener
at even a slight angle, the CORKSCREW will not remove the cork properly.
3. Hold both the bottle of wine and the Wine Opener firmly and press the lower
part of the SWITCH
. The CORKSCREW will spiral in a clockwise direction
and pierce the cork, then gradually remove it from the bottle. When the
corkscrew stops, the cork has been fully removed from the bottle.
4. Lift the CORKSCREW away from the bottle. To release the cork, simply press
the upper part of the SWITCH
. The spiral will turn counter-clockwise
and release the cork.
5. Return the Wine Opener to the CHARGING BASE after use. This will keep
the unit charged and protected while it’s not in use.
IMPORTANT: If the Wine Opener’s charge depletes during cork removal,
DO NOT FORCE the cork from the bottle. Simply rotate the Wine Opener
counter-clockwise to back the corkscrew out of the cork. Place the Wine
Opener on the CHARGING BASE to recharge.
To Next Page
Loading...
