8
The Wine Opener is not
charging or holding a charge.
The Wine Opener ran out
of power and stopped in
the middle of removing a cork.
There are pieces of cork stuck
inside the Wine Opener.
The contacts are not touching to charge.
Make sure the LED LIGHT illuminates
when you place the Wine Opener on
the CHARGING BASE.
Rotate the Wine Opener counter-clockwise
to back the corkscrew out of the cork.
Place the Wine Opener back on the
CHARGING BASE to recharge.
Press the SWITCH
to dislodge
the cork pieces.
TRoUbleshooTInG
PROBLEM SOLUTION
672451_INS_Automatic Wine Opener V2
Instructions Doc. Size: 5”W x 4.75”H
Output at 100% Prints 1/0 Black
To Next Page
Loading...
