Name - Changes the name of the track.
Move Track Up - Trades places with the track above the selected one.
Move Track Down - Trades places with the track below the selected one.
Waveform - Sets the display to waveform, the default way of visualizing audio.
Waveform (dB)
- Sets the display to waveform (dB), which is similar to waveform,
but on a logarithmic scale, measured in decibels (dB).
Spectrum
- Displays the track as a spectrogram, showing the amount of energy in
different frequency bands.
Pitch (EAC)
- Highlights the contour of the fundamental frequency (musical pitch)
of the audio, using the Enhanced Autocorrelation (EAC) algorithm.
Mono - Makes the selected track a mono track, meaning it is played out of just one
speaker, or played out of the left and right speakers equally.
Left Channel - Plays the selected track out of the left speaker.
Right Channel - Plays the selected track out of the right speaker.
Make Stereo Track
- If there is another track below the selected one, joins them
to make a single stereo track, with the top track representing the left speaker, and
the bottom track representing the right speaker. When tracks are joined into a
stereo pair, all edits automatically apply to both the left and right channel.
Split Stereo Track
- If the selected track is a stereo track (a pair of left and right
tracks joined together as a single track), this operation splits them into two separate
tracks that you can modify and edit independently.
19
To Next Page
Loading...