VIEW MENU
Zoom In - Zooms in on the horizontal axis of the audio, displaying more detail
about less time. You can also use the zoom tool to zoom in on a particular part
of the window.
Zoom Normal
- Zooms to the default view, which displays about one inch
per second.
Zoom Out - Zooms out, displaying less detail about more time.
Fit in Window - Zooms out until the entire project just fits in the window.
Fit Vertically
- Resizes all of the tracks vertically so they all fit inside the
window (if possible).
Zoom to Selection - Zooms in or out so that the selection fills the window.
Set Selection Format
- Lets you choose the formatting that is displayed at the
bottom of the window indicating the current selection time. Options include film,
video, and audio CD frames, seconds + samples or pure time. If you turn on
“Snap-To” mode in the Edit Menu, the selection will snap to the frames or other
quantization you have selected in this menu.
History - Brings up the history window, which shows all the actions you have
performed during the current session, including importing. The right-hand column
shows the amount of hard disk space your operations used. You can jump back
and forth between editing steps quite easily by simply clicking on the entries in the
window, the same as selecting “Undo” or “Redo” many times in a row. You can also
discard “Undo” history to save disk space. The history window can be kept open
while you work.
25
To Next Page
Loading...