Change Speed - Changes the speed of the audio by re-sampling. Making the
speed higher will also increase the pitch, and vice versa. This will change the
length of the selection.
Change Tempo
- Changes the tempo (speed) of the audio without changing
the pitch. This will change the length of the selection.
Compressor
- Compresses the dynamic range of the selection so that the loud
parts are softer while the volume of the soft parts remains the same. You can
optionally normalize the recording afterwards, resulting in the entire piece having
higher perceived volume.
Echo
- Very simple effect that repeats the selection with a decay, sounding like
a series of echoes. This effect does not change the length of the selection, so you
may want to add silence to the end of the track before applying it (using the
Generate Menu).
Equalization - Boosts or reduces arbitrary frequencies. You can select one of
a number of different curves designed to equalize the sound of some popular
record manufacturers, or draw your own curve.
Fade In - Fades the selection in linearly.
Fade Out - Fades the selection out linearly.
FFT Filter
- Similar to Equalization; lets you enhance or reduce arbitrary
frequencies. The curve here uses a linear scale for frequency.
Invert - Flips the waveform vertically, the same as a phase inversion
in the analogue domain.
31
To Next Page
Loading...