Brookstone iNeed - Massager Operation Guide; Using the Massager; Important Usage Note

MassaGeR oPeRaTIon
USING THE MASSAGER
1. Insert the POWER CORD into an electrical outlet.
2. Place the massager horizontally against the back of a chair (see below).
3. Wrap the HOOK & LOOP ADJUSTABLE STRAPS around the back of the chair,
adjusting them for a snug fit (see below), and press them together to secure.
4. Press the ON/OFF BUTTON
to turn the unit on.
IMPORTANT: Do not use the
massager on your spine.
5. Press the ON/OFF BUTTON
again to turn the unit off.
Note: The unit shuts off
automatically after 20 minutes.
6
739087_INS_iNeed Lumbar Massager Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk