3. Plug the CHARGING JACK into the CHARGING PORT and the other end
into an electrical outlet.
4. The CHARGING INDICATOR LIGHT on the flashlight will illuminate red to
indicate the flashlight’s battery is currently charging.
5. When the flashlight’s battery is fully charged, the CHARGING INDICATOR
LIGHT will change to green. It will take approximately 10 hours to charge
a fully depleted battery. Usage time for a 100% charged battery is
approximately 4 hours.
UsInG The flashlIGhT
1. Slide the RUBBER RING to cover the CHARGING PORT if you are going
to be using this flashlight in damp environments or inclement weather.
2. Press the ON/OFF button to turn the flashlight on and off.
3. Twist the FACE CAP/BULB ACCESS to focus the beam. Be sure not
to twist it too much, as this is how you access the bulb.
WARNING! DO NOT shine the flashlight in anyone’s eyes at any time.
6
698449_INS_Rechargeable Flashlight
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
Rubber Ring
Charging Indicator Light
Charging Jack
To Next Page
Loading...