11
caRe and MaInTenance
1. Before you clean or replace the fuse, switch the product off and remove
the plug from the power socket.
2. Use a slightly damp cloth to clean the product housing.
3. Do not use detergents, abrasive cleaning liquids, or chemical agents
(alcohol, acetate, gasoline, etc) to clean the appliance.
4. Store in a dry, dust-free area with the cord wrapped loosely around the unit.
5. If storing for a long period of time, remove the batteries from the remote control.
To replace the fuse in the plug:
1. Switch the product off and remove the plug from the power socket.
2. Access the plug’s spare fuse by sliding a small screwdriver (not included) under
the edge of the fuse cover on the plug. Carefully remove the fuse attached to
the cover by prying the metal ends with the screwdriver. Put the spare fuse
aside in a safe place.
2. To access and remove the spent fuse inside the plug, slide the tab on
the access panel inside the spare fuse cavity towards the plug prongs.
Remove the spent fuse with the screwdriver. Replace with the spare
2.5 Amp 125 Volt fuse, ensuring it is fully seated in the cavity by gently
pressing it in place on the metal ends with the screwdriver.
3. Slide the access panel over the fuse closed until it clicks, and replace
the spare fuse cover on the plug to lock it in place. Dispose of the
spent fuse properly.
To Next Page
