Brookstone SMARTSET User Manual

5. Slide the holder with the new battery back into the opening in the cabinet.
6. Tighten the screw to secure the lithium battery holder and replace the
outer battery door. Turn the product right side up and confirm that the
BATT LOW indicator is off.
BATTERY PRECAUTIONS
•Dispose of the old battery properly.
Do not dispose of the old battery in a fire.
•Do not leave the battery lying around where a young child or pet could
play with or swallow it.
If the battery is swallowed, contact a physician immediately.
•Battery may explode if mistreated.
Do not attempt to recharge or disassemble the battery.
smartset
®
clock radio
291070 SmartSet Clock Radio Instructions Doc. Size: 5"W x 4.75"H Output at 100% Prints 1/0 Black
Nashua, New Hampshire 03062
Customer Service 800-846-3000
291070
291070_INS_SmartsetCloRad NEWT 10/3/02 9:38 AM Page 1

Brookstone SMARTSET Specifications

General

Brand	Brookstone
Model	SMARTSET
Category	Clock Radio
Language	English

Summary

Battery Precautions

Battery Information

Changing the Lithium Battery

Details on replacing the built-in lithium battery due to factors affecting its lifespan.

Important Safety Instructions

Alarm Operation

Waking to the Buzzer

Steps to set and use the buzzer alarm for waking up.

Waking to the Radio

Steps to set and use the radio alarm for waking up.

Alarm Settings

Clock and Alarm Operation

Setting the Time

Initial setup of the clock, including automatic time setting and default zone.

Changing the Default Time Zone Display

How to adjust the clock to your local time zone for accurate timekeeping.

FCC Information

Clock/Alarm Operation

Checking Wake-Up Times and Alarm Mode

How to view the set wake-up times and the selected alarm mode.

Resetting the Clock After Total Memory Loss

Procedure to restore the clock settings after power interruption or battery depletion.

Set Up

Location of Controls and Indicators

Adjusting Time Manually

How to manually set the clock time, overriding the automatic SmartSet feature.

Adjusting Wake-Up Times

Setting the specific wake-up times for Alarm 1 and Alarm 2.

Displaying the Date

Displaying the Year