•While holding TIME ZONE, press either UP or DOWN until your own time
zone appears on the display.
•Release the buttons, and the display will now show the correct time in
your time zone.
If you move to a different time zone, change the default zone display to the
new zone and the SmartSet
®
will remember that setting for you.
Displaying the Date
To see the correct date at any time, press MTH/DATE. The display changes
from time to month/date (MM/DD). For example, May 21st will appear as
“5 21.” When you release MTH/DATE, the display returns to the correct time.
Displaying the Year
To see the correct year, press TIME and MTH/DATE together. The display
changes from time to year. When you release TIME and MTH/DATE, the
display returns to the correct time.
All Daylight Saving and Leap Year adjustments are made automatically by the
SmartSet
®
internal computer as follows:
•Start of Daylight Saving Time: At 1:59.59 AM on the first Sunday in April, the
clock will automatically advance to 3:00 AM.
•End of Daylight Saving Time: At 2:59.59 AM on the last Sunday in October,
the clock will automatically reset to 2:00 AM.
•Leap Year: At 12 Midnight on February 28th, the calendar display will
change to "2 29."
14
TOP PANEL
1. SLEEP ON(Sleep to Music Timer)
2. TIME ZONE
3. ALARM MODE (Weekdays/Weekends/Everyday)
4. ALARM 1
5. ALARM 2
6. DOWN
7. UP
8. RADIO ON/OFF
9. MTH/DATE
10. TIME
11. SNOOZE (SLEEP OFF)
LEFT SIDE
12. DIMMER (LOW/HIGH).
13. ALARM 1 Selector (BUZZ/RADIO/OFF)
14. ALARM 2 Selector (BUZZ/RADIO/OFF)
RIGHT SIDE
15. TUNING
16. AM/FM Selector
17. VOLUME
291070 SmartSet Clock Radio Instructions Doc. Size: 5"W x 4.75"H
Output at 100% Prints 1/0 Black
11
To Next Page
Loading...
