EasyManua.ls Logo

Brose Drive Magnesium - User Manual

Brose Drive Magnesium
14 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Brose Drive Magnesium
E 57028 / E 41219
E 57026 / E 41222
E 06855 / E 06855
E
N User Manual
190821_Brose_BDA-DriveMag-Multi.indd 1 21.08.2019 14:35:32

Table of Contents

Questions and Answers

  • T
    tholmesAug 11, 2025
    What to do if my Brose Bicycle Accessories display unit and/or drive system cannot be activated?
    • M
      Michele SmithAug 11, 2025
      If your Brose Bicycle Accessories display unit or drive system won't activate, several factors could be at play. First, ensure the battery is correctly clicked into the holder; if not, remove and reinsert it properly. Next, check if the battery is fully charged using the supplied charger. Also, inspect the battery and display unit contacts for dirt; clean with a soft, dry cloth if needed. Verify the display unit and drive unit plug connections are secure. Check cabling and connections and connect them correctly if necessary.
  • M
    Megan BrownAug 16, 2025
    Why my Brose Bicycle Accessories display unit does not provide trip data even though the e-bike is in motion?
    • T
      townsendconnorAug 16, 2025
      If your Brose Bicycle Accessories display unit isn't showing trip data while the e-bike is moving, the issue might be the spoke magnet's position. Check that the spoke magnet is correctly mounted and that the distance to the speed sensor on the chainstay is between 5 and 17 mm. Adjust the distance if necessary.
  • K
    Kenneth LewisAug 22, 2025
    What to do if Brose Drive Magnesium Bicycle lighting faults?
    • J
      James BartonAug 22, 2025
      If you're experiencing faults with your Brose Bicycle Accessories lighting, turn off the system completely. Then, carefully inspect all cables and connectors of both the front and rear lighting systems. After checking the connections, restart the system.
  • B
    bwhitakerAug 28, 2025
    What to do if Brose Drive Magnesium brake lighting faults?
    • K
      Kylie KellyAug 28, 2025
      If you're experiencing issues with your Brose Bicycle Accessories brake lighting, turn off the system completely. Then, check all the cables and connectors related to the brake system. Finally, restart the system.
  • L
    Lisa BellSep 3, 2025
    How to fix Brose Drive Magnesium Bicycle Accessories if bicycle lighting cannot be activated?
    • A
      amanda90Sep 3, 2025
      If your Brose Bicycle Accessories lighting won't activate, the lighting cable might be incorrectly connected. Check the cabling and connections, and ensure they are correctly connected.

Brose Drive Magnesium Specifications

General IconGeneral
Motor TypeMid-drive motor
Power Output250 W
Torque90 Nm
MaterialMagnesium
Nominal Voltage36 V
Battery CompatibilityBrose 36V battery systems
CompatibilityAll common frame standards

Related product manuals