Brose E 41222 - User Manual

Questions and Answers

E
ericahuffAug 9, 2025
What to do if my Brose Bicycle Accessories display unit and/or drive system cannot be activated?
- R
  Richard PetersAug 9, 2025
  If your Brose Bicycle Accessories display unit or drive system won't activate, several factors could be at play. First, ensure the battery is correctly clicked into the holder; if not, remove and reinsert it properly. Next, check if the battery is fully charged using the supplied charger. Also, inspect the battery and display unit contacts for dirt; clean with a soft, dry cloth if needed. Verify the display unit and drive unit plug connections are secure. Check cabling and connections and connect them correctly if necessary.
S
Stephanie WilliamsAug 15, 2025
Why my Brose E 41222 Accessories display unit does not provide trip data even though the e-bike is in motion?
- L
  Lisa BallAug 16, 2025
  If your Brose Bicycle Accessories display unit isn't showing trip data while the e-bike is moving, the issue might be the spoke magnet's position. Check that the spoke magnet is correctly mounted and that the distance to the speed sensor on the chainstay is between 5 and 17 mm. Adjust the distance if necessary.
J
james70Aug 21, 2025
What to do if Brose E 41222 lighting faults?
- N
  Nicholas BoyleAug 21, 2025
  If you're experiencing faults with your Brose Bicycle Accessories lighting, turn off the system completely. Then, carefully inspect all cables and connectors of both the front and rear lighting systems. After checking the connections, restart the system.
M
Matthew LunaAug 27, 2025
What to do if Brose Bicycle brake lighting faults?
- J
  Jennifer SheppardAug 27, 2025
  If you're experiencing issues with your Brose Bicycle Accessories brake lighting, turn off the system completely. Then, check all the cables and connectors related to the brake system. Finally, restart the system.
P
Patty MartinezSep 2, 2025
How to fix Brose Bicycle Accessories if bicycle lighting cannot be activated?
- P
  petersonxavierSep 2, 2025
  If your Brose Bicycle Accessories lighting won't activate, the lighting cable might be incorrectly connected. Check the cabling and connections, and ensure they are correctly connected.